Ding H., Li G., Yan L., Liu Z., Lu L., Yang G., Zhang Q., Zhao J., Qiu X., Gu G., Yang F., Qian T., Zhong Y., Tang C., Shen J., Gan Y., Phan G.N., Sui Q.
Ключевые слова: Bi2212, single crystals, doping, annealing process, phase diagram, X-ray diffraction, microstructure, resistance, Hall effect, fabrication, experimental results
Ключевые слова: MRI magnets, coils, fabrication, LTS, NbTi, joints, winding techniques, insulation, geometry effects, design, design parameters
Ключевые слова: magnets, conduction cooled systems, Hall sensor, design, fabrication, quench protection, LTS, NbTi, coils, homogeneity, magnetic field distribution, cryocoolers, stress distribution, mechanical properties, cryogenic systems, cryostat, thermal loads, cooling technology, quench current, training effect
Ключевые слова: MRI magnets, high field magnets, fatigue behavior, cryogenic systems, nitrogen liquid , insulation, test results, cooling technology, NbTi, LTS
Wang Q., Li Y., Yang W., Dong Z., Zhu X., Hu G., Hu Y., Ni Z., Xu J., Cheng J., Wang H., Dai Y., Yan L., Liu F., Xia L., Cheng W., Mu X., Zheng J., Niu C., Wang L., Zhu G., Sun W., Zhao B., Li X., Liu J., Yan C.
Ключевые слова: MRI magnets, high field magnets, design, review, design parameters, resonance effects
Ключевые слова: MRI magnets, modeling, homogeneity, magnetic field distribution, numerical analysis
Ключевые слова: joints superconducting , LTS, NbTi, fabrication, experimental results
Ключевые слова: LTS, NbTi, coils pancake, suspension, torque, magnetic field distribution, experimental results
Ключевые слова: cryogenic systems, design, experimental results, helium liquid, design parameters, cooling technology, nitrogen liquid
Ключевые слова: joints superconducting , contact characteristics, cold pressing, LTS, NbTi, microstructure, deformation
Ключевые слова: magnetic systems, HTS, YBCO, coated conductors, coils pancake, coils insert, LTS, Nb3Sn, NbTi, design, fabrication, quench properties
Ключевые слова: rotating machines, rotors, spheres, rotational speed, numerical analysis, torque, angular dependence, helium
Wang L., Wang H., Wang H., Li Y., Zhao B., Yan L., Chen S., Huang H., Wang Q., Dai Y., Song S., Li L., Hu X., Liu J., Cheng J., Cui C., Ni Z.
Ключевые слова: magnetic systems, design, fabrication, HTS, Bi2223, tapes, coils, LTS, NbTi, test results, high field magnets, cryogenic systems, cryocoolers, mechanical properties, stress effects, quench properties, stress distribution, quench detection, cooling technology, quench current, training effect
Ключевые слова: MRI magnets, quench protection, design, heater, design parameters, hot spots, numerical analysis
Ключевые слова: modeling, rotating machines, rotors, torque, spheres, geometry effects, bearing magnetic, stiffness
Ключевые слова: MRI magnets, design, shielding effects, numerical analysis, magnetic field distribution
Ключевые слова: LTS, NbTi, joints, cold isostatic pressing, numerical analysis, NMR magnet, fabrication, mechanical properties, stress effects, strain effects, cold pressing
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.